9240 RF Voltmeter

Probes
9241	Single-input channel
9242	Dual-input channels. Allow display of channels 1 and 2 and ratio of channels expressed in dB
-01	Rear panel inputs
-02	Warranty extension to 3 years
95403001A	Rack mounting kit
95109001A	Sensor data adaptor
952063	Standard probe, 10 kHz - 1.2 GHz
952064	Low-frequency probe, 10 kHz - 100 MHz

Voltage Range	200 μV to 10 V in eight ranges (300 V to 700 MHz with a 100:1 divider) Indications to 50 μV
Voltage Display	1 mV to 300 V fs
Frequency Range	10 kHz to 1.2 GHz with 952001A probes 10 Hz to 100 MHz with Model 952016 probe
Waveform Response	RMS to 30 mV calibrated in the RMS of a sine wave above 30 mV (RMS to 3V and 700 MHz with 100:1 divider)
Input Capacitance	Less than 1.5 pF
Recorder Output	10 V fs proportional to indicated voltage in mV mode over a range 7V = 0dBm regardless of Z. in dB mode, sensitivity of 1V per 10dB change over entire range

Accessories Required
One or more of the available probe kits with sensor data adapter is required (one per probe included) to be ordered along with 9240 series.
Accessories Available
41-2A/10	Sensor/Probe Interconnecting Cable (10 ft) A special low-noise cable that connects the power sensor to the power meter.
41-2A/20	Sensor/Probe Interconnecting Cable (20 ft)
41-2A/50	Sensor/Probe Interconnecting Cable (50 ft)
41-2A/100	Sensor/Probe Interconnecting Cable (100 ft)
95004701A	F/F Adapter, 41-2A
95004901A	Bulkhead Connector F/F
95403001A	Rack Mounting Kit 4241 Single Channel
95005901A	Rack Slide Kit 4242 Dual Channel
95109001A	Sensor Data Adapter
95006001A	Transit case (Holds the 4240 series & up to 4 sensors)

Products